Dell PowerConnect 2808 User Manual

Also see for PowerConnect 2808: Getting started guide User guide Quick guide Release notes

Contents

Dell PowerConnect 2808 User Manual Manual pdf 63 page image

Dell PowerConnect 28xx Systems User Guide 63Defining Device IP AddressesThe IP Addressing page contains a link to the IP Interface Parameters page that is used to assign thedevice IP address, subnet mask and default gateway, and for enabling or disabling DHCP.To open the IP Addressing page, click System  IP Addressing in the tree view.Defining IP Interface ParametersTo open the IP Interface Parameters page, click System IP Addressing  IP Interface Parameters inthe tree view.Figure 6-6. IP Interface Parameters• DHCP — The DHCP client can be enabled to acquire the network configuration dynamically. TheDHCP default value is Disable. This field enables the DHCP client.• IP Address — Specifies the IP Address currently assigned to the device.• Subnet Mask— Specifies the subnet mask of the IP Address, currently assigned to the device.• Default Gateway — Specifies the Default Gateway Address, currently assigned to the device.Setting static IP Interface parameters:1 Open the IP Interface Parameters page.2 Set the IP Address, Subnet Mask and Default Gateway.3 Click Apply Changes.The static interface parameters are set and the device is updated.