Dell PowerConnect 3248 System User's Manual

Also see for PowerConnect 3248: Manual Features list Specification

Copying the Running Configuration to a File1. In the Copy Running Config to File field, specify a filename for the configuration file (with no more than 32 characters). If the filename already exists, itreplaces the file. The filename cannot be the same as the factory default configuration file, Factory_Default_Config.cfg.2. Click Copy to File.CLI CommandsThe following table summarizes the equivalent CLI commands for items in the Switch/Configuration page.ExampleConsole#copy tftp startup-configTFTP server ip address: 10.1.0.99Source configuration file name: startup.01Startup configuration file name [startup]:/Console#ResetClick Reset to reboot the switch. When prompted, confirm that you want to reset the switch.CLI CommandsThe following table summarizes the equivalent CLI command for items in the Switch/Reset page.ExampleCommand Usagecopy file {file | running-config | startup-config | tftp}Uploads a configuration file from the switch's flash memory to aTFTP servercopy tftp {file | running-config | startup-config}Downloads a configuration file to the switch's flash memory froma TFTP serverboot system {boot-rom| config | opcode}:filenameSpecifies the file or image used to start up the systemCommand Usagereload Restarts the system