330 Dell PowerConnect 55xx Systems User GuideFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\CxUGSystemConfig.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY– Group Name — Select the group to be associated with thecommunity.Configuring Communities Using CLI CommandsThe following table summarizes the CLI commands for setting fields in theCommunity pages.The following is an example of the CLI commands:SNMP Notification FiltersNotification filters determine the type of SNMP notifications that are sent tothe management station, based on the OID of the notification to be sent.Each OID is linked to a device feature or a feature aspect.SNMP notification filters provide the following services:• Identification of management trap targets• Trap filteringTable 9-60. SNMP Community CLI CommandsCLI Command Descriptionsnmp-server community community[view view-name] [ro|rw|su]{ipv4-address|ipv6-address}[mask mask-value|prefix-lengthprefix-value] [type router|oob]Sets up the community access stringto permit access to the SNMPprotocol.Use the no form of this command toremove the specified communitystringsnmp-server community-groupcommunity group-name [ipv4-address|ipv6-address][mask|prefix-length][type router|oob]no snmp-server community string[ipv4-address|ipv6-address]Sets up community access string topermit limited access to the SNMPprotocol, based on group accessrights.show snmp Displays the current SNMP deviceconfiguration.console (config)# snmp-server community dell ro 10.1.1.1
