Command Groups 39QoS CommandsCommand Group Description Modeqos Enables quality of service (QoS) on the device and enters QoS basic oradvance mode.GCshow qos Displays the QoS status. UEpriority-queue out num-of-queuesEnables the egress queues to be expedite queues. GCtraffic-shape Sets a shaper on an egress port/queue. ICqos wrr-queue threshold Assigns the tail-drop mechanism on an egress queue and configuresthe tail-drop thresholds.GCwrr-queue bandwidth Assigns Weighted Round Robin (WRR) weights to egress queues. ICwrr-queue Defines the wrr-queue mechanism on an egress queue. ICshow qos interface Displays interface QoS data. UEqos map dscp-queue Modifies the DSCP to CoS map. GCqos map tcp-port-queue Modifies the TCP-Port to DSCP table. GCqos map udp-port-queue Modifies the UDP-Port to DSCP table. GCwrr-queue cos-map Assigns CoS values to select one of the egress queues. GCshow qos map Displays all the QoS maps. PEqos trust (Global) Configures the system to basic mode and the "trust" state. GCqos trust (Interface) Enables each port trust state while the system is in basic mode. ICqos cos Configures the default port CoS value. ICqos dscp-mutation Modifies the DSCP to DSCP mutation map. GCqos map dscp-mutation Modifies the DSCP values to the DSCP mutation map values. GCqos aggregate-policer Defines the policer parameters that can be applied to multiple trafficclasses within the same policy map.GCshow qos aggregate-policer Displays the aggregate policer parameter. UEqos map policed-dscp Modifies the policed-DSCP map for remarking purposes. GCclass-map Creates class maps and enters the class-map configuration mode. GCshow class-map Displays all the class maps configured on the device. UEmatch Defines the match criterion to classify traffic. MTpolicy-map Creates policy maps and enters policy-map configuration mode. GCshow policy-map Displays the defined policy maps. UE
