Command Groups 41RMON CommandsSNMP Commandsrip offset Adds an offset to a metric learned via RIP before adding them to theinterface table.ICrip default-route offset Generates a default route into RIP. ICrip authentication Enables authentication for RIP Version 2 packets and specifies theauthentication type.ICshow ip rip Displays RIP routing information. PECommand Group Description Modeshow rmon statistics Displays RMON Ethernet Statistics. UErmon collection history Enables a Remote Monitoring (RMON) MIB history statistics groupon an interface.ICshow rmon collection history Displays the requested history group configuration. UEshow rmon history Displays RMON Ethernet Statistics history. UErmon alarm Configures alarm conditions. GCshow rmon alarm-table Displays the alarms summary table. UEshow rmon alarm Displays alarm configurations. UErmon event Configures a RMON event. GCshow rmon events Displays the RMON event table. UEshow rmon log Displays the RMON logging table. UErmon table-size Configures the maximum RMON tables sizes. GCCommand Group Description Modesnmp-server community Sets up the community access string to permit access to SNMPprotocol.GCsnmp-server contact Sets up a system contact. GCsnmp-server location Sets up the information on where the device is located. GCsnmp-server enable traps Enables the switch to send SNMP traps or SNMP notifications. GCsnmp-server trap authentication Enables the switch to send SNMP traps when authentication failed. GCsnmp-server host Specifies the recipient of SNMP notifications. GCsnmp-server set Sets SNMP MIB value by the CLI. GC
