Dell PowerConnect 6200 Series Getting Started Manual

Also see for POWERCONNECT 6200 SERIES: Getting started guide Configuration guide

64 Guia de inicializaçãow w w . d e l l . c o m | s u p p o r t . d e l l . c o m Please enter the IP address of the Management System (A.B.C.D)or wildcard (0.0.0.0) to manage from any Management Station{0.0.0.0}:192.168.1.10Etapa 2:Now we need to configure your initial privilege (Level 15) useraccount. This account is used to login to the CLI and Webinterface. You may set up other accounts and change privilegelevels later. For more information on setting up user accountsand changing privilege levels, see the User’s Guide.To set up a user account:Please enter the user name {admin}: adminPlease enter the user password: ********Please reenter the user password: ********NOTA: Se a primeira e a segunda senha inseridas não forem idênticas, o usuário será notificado atéque o sejam.NOTA: É possível criar contas de usuário adicionais após concluir o uso do utilitário Easy Setup Wizard(Assistente de configuração fácil). Consulte o Guia do usuário para obter mais informações.Etapa 3:Next, an IP address is set up. The IP address is defined on thedefault VLAN (VLAN #1), of which all ports are members. This isthe IP address you use to access the CLI, Web interface, or SNMPinterface for the switch.To set up an IP address:Please enter the IP address of the device (A.B.C.D):192.168.1.100Please enter the IP subnet mask (A.B.C.D or /nn):255.255.255.0Etapa 4:Finally, set up the gateway. Please enter the IP address of thegateway from which this network is reachable (e.g. 192.168.1.1):192.168.1.1