Dell PowerConnect 6224 Command Line Interface Manual

Also see for PowerConnect 6224: Configuration guide Release note User guide Specifications Planning and preparation guide

Contents

Captive Portal Commands 1067configurationUse the configuration command to enter the captive portal instance mode.The captive portal configuration identified by CP ID 1 is the default CPconfiguration. The system supports a total of ten CP configurations. Use the“no” form of this command to delete a configuration. The defaultconfiguration cannot be deleted.Syntaxconfigurationcp-idno configurationcp-id•cp-id—Captive Portal ID (Range: 1–10).Default ConfigurationThere is no default configuration for this command.Command ModeCaptive Portal Configuration mode.User GuidelinesThere are no user guidelines for this command.Exampleconsole(config-CP)#configuration 2console(config-CP 2)#enableUse the enable command to enable a captive portal configuration. Use the“no” form of this command to disable a configuration.Syntaxenableno enable