800 IPv6 Routing CommandsThe following information is displayed if the operational mode of the MLDinterface is enabled:Query Interval This field indicates the configured query interval for theinterface.Query MaxResponse TimeThis field indicates the configured maximum query responsetime (in seconds) advertised in MLD queries on this interface.Robustness This field displays the configured value for the tuning for theexpected packet loss on a subnet attached to the interface.Startup QueryIntervalThis value indicates the configured interval between GeneralQueries sent by a Querier on startup.Startup QueryCountThis value indicates the configured number of Queries sent outon startup, separated by the Startup Query Interval.Last MemberQuery IntervalThis value indicates the configured Maximum Response Timeinserted into Group-Specific Queries sent in response to LeaveGroup messages.Last MemberQuery CountThis value indicates the configured number of Group-SpecificQueries sent before the router assumes that there are no localmembers.Querier Status This value indicates whether the interface is a MLD querier ornon-querier on the subnet with which it is associated.Querier Address The IP address of the MLD querier on the subnet the interfacewith which it is associated.Querier Up Time Time elapsed in seconds since the querier state has beenupdated.Querier ExpiryTimeTime left in seconds before the Querier losses its title as querier.Wrong VersionQueriesIndicates the number of queries received whose MLD versiondoes not match the MLD version of the interface.Number of Joins The number of times a group membership has been added onthis interface.Number of Leaves The number of times a group membership has been removed onthis interface.Number of Groups The current number of membership entries for this interface.
