688 IPv6 Routing CommandsExampleconsole#show ipv6 mld-proxy groupsInterface................................ vlan 10Group Address Last Reporter Up Time Member State Filter Mode Sources------------- -------------- ---------- ----------------- ------------ -------FF1E::1 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 2FF1E::2 FE80::100:2.3 00:02:40 DELAY_MEMBER Include 1FF1E::3 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 0FF1E::4 FE80::100:2.3 00:02:44 DELAY_MEMBER Include 4show ipv6 mld-proxy groups detailUse the show ipv6 mld-proxy groups detail command to display information about multicastgroups that MLD Proxy reported.Syntaxshow ipv6 mld-proxy groups detailDefault ConfigurationThere is no default configuration for this command.Command ModePrivileged EXECUser GuidelinesThe following parameters are displayed by this command:Interface The interface number of the MLD-Proxy.Group Address The IP address of the multicast group.Last Reporter The IP address of the host that last sent a membership report for the current groupon the network attached to the MLD Proxy interface (upstream interface).Up Time (in secs) The time elapsed in seconds since last created.Member State Possible values are:• Idle_Member—The interface has responded to the latest group membershipquery for this group.• Delay_Member—The interface is going to send a group membership report torespond to a group membership query for this group.Filter Mode Possible values are Include or Exclude.
