Dell PowerConnect 8024 Cli Reference Manual

Also see for PowerConnect 8024: Release notes Release note Upgrading Firmware User guide User manual

Contents

Dell PowerConnect 8024 Cli Reference Manual Manual pdf 759 page image

OSPF Commands 759ExampleThe following example configures OSPF protocol to allow redistribution of routes from thespecified source protocol/routers.console(config-router)#redistribute rip metric 90 metric-type 1tag 555 subnetsrouter-idUse the router-id command in Router OSPF Configuration mode to set a 4-digit dotted-decimal number uniquely identifying the router OSPF ID.Syntaxrouter-idip-address•ip-address — IP address that uniquely identifies the router OSPF ID.Default ConfigurationThis command has no default configuration.Command ModeRouter OSPF Configuration mode.User GuidelinesThis command has no user guidelines.ExampleThe following example defines the router OSPF ID as 5.5.5.5.console(config)#router ospfconsole(config-router)#router-id 5.5.5.5router ospfUse the router ospf command in Global Configuration mode to enter Router OSPF mode.Syntaxrouter ospfDefault ConfigurationThis command has no default configuration.