Dell PowerConnect J-8208 Release Note

Also see for PowerConnect J-8208: Hardware guide Quick start guide Release note

Contents

Dell PowerConnect J-8208 Release Note Manual pdf 9 page image

Outstanding Issues in JUNOS Release 10.2 for J-EX Series SwitchesThe following are outstanding issues in JUNOS Release 10.2R1 for J-EX Series switches.The identifier following the description is the tracking number in our bug database.• Access Control and Port Security• Bridging, VLANs, and Spanning Trees• Class of Service• Infrastructure• Interfaces• J-Web Interface• Layer 2 and Layer 3 Protocols• Virtual ChassisAccess Control and Port Security• On J-EX Series switches, when you enable and disable IPv6 on the managementinterface (me0), the management information is not displayed in the show lldplocal-information command output. [PR/503955]• On J-EX4200 switches, the LLDP-MED Location ID contains incorrect Type, Length,and Value (TLV). [PR/521658]• On J-EX4200 switches, deleting a static MAC address entry from the Ethernet switchingtable does not change the authentication status for the interface in the 802.1X tablewith MAC RADIUS, and the interface remains authenticated. [PR/523919]• On J-EX4200 switches with static MAC bypass of authentication configured, MACaddress learning takes a few minutes after the MAC address table is cleared.[PR/524044]• On J-EX Series switches, you might experience traffic drops under certain networkconditions, even though the user is authenticated. As a workaround, you may restartthe dot1x-protocol. [PR/524675, 528691Bridging, VLANs, and Spanning Trees• There might be traffic loss on VLANs learned through MVRP during GRES. After theGRES, there will not be any traffic loss. [PR/458303]• On J-EX Series switches, in a scaled environment with more than 4000 VLANs, MVRPadvertisements might not be sent intermittently when the VLAN membership ismodified. [PR/475701]Class of Service• On J-EX4200 switches, the show interface queue command output displays the countof transmitted packets and queued packets together under the field Queued insteadof displaying the values under Queued and Transmitted fields. [PR/259525]• If you are configuring an interface as part of an aggregated Ethernet interface and alsoconfiguring CoS on that interface, do not commit both configurations using a single9Outstanding Issues in JUNOS Release 10.2 for J-EX Series Switches