Dell PowerConnect W-Airwave Configuration Manual

Also see for PowerConnect W-Airwave: User guide User guide Manual Manual Quick start guide

Contents

162 | Aruba Configuration Reference AirWave Wireless Management Suite | Configuration GuideMaximum Number of Active Bindings(0-5000)5000 Define the maximum number of bindings in whichthe home agent network is to support a clientwhen the client is out of range of the network, orotherwise disconnected.Proxy Mobile IPTrigger Mobility on StationAssociationYes Enable this setting to trigger client mobilityprocessing on the network once a client hasassociated to the network in mobile fashion.The proxy mobile IP module in a mobility-enabledcontroller detects when a mobile client hasmoved to a foreign network and determines thehome agent for a roaming client. The proxymobile IP module performs the followingfunctions:z Derives the address of the home agent for amobile client from the HAT using the mobileclient’s IP address. If there is more than onepossible home agent for a mobile client in theHAT, the proxy mobile IP module uses adiscovery mechanism to find the currenthome agent for the client.z Detects when a mobile client has moved.Client moves are detected based on ingressport and VLAN changes and mobility istriggered accordingly. For faster roamingconvergence between AP(s) on the samecontroller, it is recommended that you keepthe “on station association” option enabled.This helps trigger mobility as soon as 802.11association packets are received from themobile client.Enable Support for Standalone APs No Select this option to support standalone APs onthe IP Mobility domain.Log User Moves Yes Enable this option to log client movement in theIP Mobility domain. This setting is derived fromstation association in a foreign network.Allow Roaming for AuthenticatedStations OnlyYes Enable this setting to require authentication forroaming stations.Filter out DHCP Release from Stations No Enable or disable the filtering of DHCPinformation when a client is released from astation.Re-home Idle Voice Capable Client No Enable or disable re-homing for idle voice-capable clients. This setting reassigns the homenetwork in relation to a voice-capable client thatis idle (non-roaming).Maximum Number of Station MobilityEvents Per Second (1-65535)10 Set the maximum number of events, per second,that station mobility events can be supported.Maximum Interval Mobility Will HoldInactive Host Trail(120-3600 sec)600 Define how long inactive host trails are to besupported in IP mobility.Maximum Entries in User Mobility Trail(1-30)10 Define how many events are to be logged in IPmobility.Table 74 Advanced Services > IP Mobility, Add/Edit Field Descriptions (Continued)Field Default Description