86 | Managing IAPs Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide7. After conversion, the IAP will be managed by the Mobility Controller which has been specified in the InstantUI.Converting an IAP to CAPTo convert an IAP to Campus AP, do the following:1. Navigate to the Maintenance tab in the top right corner of the Instant UI.2. Click the Convert tab.Figure 73 Converting an IAP to CAP3. Select Campus APs managed by a Mobility Controller from the drop-down list.4. Enter the hostname (fully qualified domain name) or the IP address of the controller in the Hostname or IPAddress of Mobility Controller text box. This information is provided by your network administrator.5. Click Convert Now to complete the conversion.Converting an IAP to Standalone ModeThis feature allows you to deploy an Instant AP as an autonomous AP which is a separate entity from the existingVirtual Controller cluster in the same Layer 2 domain.1. Navigate to the Maintenance tab in the top right corner of the Instant UI.2. Click the Convert tab.NOTE: In order for the RAP conversion to work, ensure that you configure the Instant AP in the controller white-list and enable theFTP service on the controller.NOTE: If the VPN setup fails and an error message pops up, please click OK, copy the error logs and share them with your Dellsupport engineer.NOTE: Ensure the Mobility Controller IP Address is reachable by the IAPs.
