30 Basic Software OperationClick the Properties task button.-or-Right-click the unit and select Properties. The Properties dialog boxappears.3 Click the Network tab and type in the address of the Remote ConsoleSwitch. This field can contain an IP dot notation or a domain name.Duplicate addresses are not allowed and the field cannot be left blank. Youcan enter up to 128 characters, and may use an IPv4 or an IPv6 address, ordual-stack an IPv4 and IPv6 simultaneously.4 Type the HTTP and HTTPS port numbers in the HTTP Port and HTTPSPort fields, respectively, if you changed the port numbers for the RemoteConsole Switch in the serial console. For more information on changingthe port numbers in the serial console, see "HTTP/HTTPS Options" onpage 37.5 Click Apply to save the new settings.-or-Click OK to save the new settings and close the window.-or-Click Cancel to exit without saving the new settings.Information PropertiesThe Information tab allows you to enter information about the switch orserver including a description, contact information and any comments youmight wish to add.To change information properties:1 In the software, click the Remote Console Switches or Server tab and thenselect an individual unit in the Unit Selector list.2 Select View - Properties from the Explorer menu.-or-Click the Properties task button.-or-
