Dell PowerEdge 180AS User Manual

Also see for PowerEdge 180AS: Cable Routing guide User guide Installer/user guide Hardware user's guide

Contents

56 Using the ViewerExpanding and Refreshing Your ViewerBy default, there are three buttons that display on the Viewer toolbar thatallow you to adjust the Viewer display. The first button allows you to set theViewer to Single Cursor Mode. This allows you to use the mouse in theViewer as if it was the mouse on the server. When the Viewer is set to SingleCursor mode the local cursor is not displayed.NOTE: Single Cursor mode operates on Windows platforms only.The second button allows you to refresh the video and the third allows you toalign the mouse cursors.Figure 4-5. Viewer Toolbar- Display Adjustment ButtonsTo set the Viewer to Single Cursor mode:In the Viewer toolbar, click the Single Cursor Mode button.To refresh the screen:Click the Refresh Image button on the Viewer toolbar.-or-From the Viewer menu, select View - Refresh. The digitized video image willbe completely regenerated.To align the mouse cursors:Click the Align Local Cursor button on the Viewer toolbar. The local cursorwill align with the cursor on the remote server.To enter full screen mode:Click the Maximize button in the top right-hand corner of the Viewer.-or-From the Viewer menu, select View - Full Screen. The desktop window willdisappear and only the accessed server desktop will be visible. The screen willbe resized up to a maximum of 1600 x 1200 (standard) and 1680 x 1050(widescreen). If the desktop has a higher resolution, then a black backgroundwill surround the full screen image. The floating toolbar will appear.To exit full screen mode: