Dell PowerEdge 2650 Instructions Manual

Also see for PowerEdge 2650: Manual Installation guide Installation guide Install guide Information update

Contents

assembling the dc input power cable

Dell PowerEdge 2650 Instructions Manual Manual pdf 4 page image

1-2 Cabli ng Instr uctions f or t he ñ48 V DCw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Input RequirementsKit Contentsï AMP 794949-1 connector housing, or equivalentï AMP 350218-1 connector contacts, or equivalentï AMP 2-36161-5 ring-tongue terminal, or equivalentï #6-32 nut equipped with lock washerï Heat-shrink tubingRequired Toolsï Wire-stripper pliers capable of removing insulation from size 16 AWG solid orstranded, insulated copper wireï Three UL 1061 16 AWG black wires (ñ48 VDC)ï Three UL 1061 16 AWG red wires (ñ48 VDC return)ï One UL 1015 12 AWG green/yellow, green with a yellow stripe, wire (ground)ï AMP 90296-2 hand-crimping tool, or equivalentï AMP 59824-1 hand-crimping tool, or equivalentï Heat gunAssembling the DC Input Power CableCAUTION: Before connecting safety ground or power cables to the connector,ensure that the power is removed from the DC circuit. To ensure that the poweris off, locate the circuit breaker on the DC source circuit. Switch the circuitbreaker to the off position and, if available, install an approved safety lockingdevice to the circuit breaker or switch, to prevent against another personenergizing the circuit.Supply voltage: ñ(48ñ60) VDCCurrentconsumption: 8 A0R216bk0.book Page 2 Monday, April 8, 2002 1:25 PM