Dell PowerEdge 6950 Getting Started

Also see for PowerEdge 6950: Hardware owner's manual Information update Hardware installation guide Information update Installation instructions

Contents

Getting Started With Your System 7Connecting the System and Monitor Power CablesConnect the monitor's power cable to the monitor (optional). Connect the system’s power cablesto the system.Plug the other end of the power cables into a grounded electrical outlet or a separate power sourcesuch as an uninterrupted power supply (UPS) or a power distribution unit (PDU). If possible, connectthe power supplies to two different 110V power sources or two different 220V power sources,depending on the power supplies used.Turning on the System and MonitorPress the power button on the system and the monitor (optional). The power indicators should light.Adjust the monitor's controls until the displayed image is satisfactory.If you have purchased the optional system bezel, install it after turning on the system.