202 Installing System ComponentsInstalling the NVIDIA Tesla M2090 GPGPU CardCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized is not covered bywarranty. Read and follow the safety instructions that came with the product.1 Align the mounting brackets with the screw holes on the GPGPU card. SeeFigure 3-49.2 Replace the four screws securing the two mounting brackets. SeeFigure 3-49.3 Connect the emergency throttling cable to the GPGPU card. SeeFigure 3-49.4 Replace the GPGPU card assembly. See "Installing the Front GPGPU CardAssembly" on page 193 or "Installing the Back GPGPU Card Assembly" onpage 200.5 Close the sled. See "Installing the Sled Cover" on page 168.6 Replace the sled. See "Installing a Sled" on page 142.GPGPU Card RisersRemoving the Front GPGPU Card RiserCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized is not covered bywarranty. Read and follow the safety instructions that came with the product.1 Remove the sled from the enclosure. See "Removing a Sled" on page 141.2 Remove the front GPGPU card assembly. See "Removing the FrontGPGPU Card Assembly" on page 188.1 NVIDIA Tesla M2090 GPGPU card 2 screws (4)3 mounting brackets (2) 4 emergency throttling cable
