72 Using the System Setup Program and UEFI Boot ManagerWhen an optional iDRAC6 Express card is installed, Unified ServerConfigurator provides the following additional features:• Downloading and applying firmware updates• Configuring hardware and firmwareFor more information about setting up Unified Server Configurator,configuring hardware and firmware, and deploying the operating system, seethe Unified Server Configurator documentation on the Dell Support websiteat support.dell.com/manuals.Baseboard Management Controller ConfigurationThe BMC enables configuring, monitoring, and recovery of systems remotely.The BMC provides the following features:• Enables fault logging and SNMP alerting• Provides access to system event log and sensor status• Allows control of system functions including power on and off• Functions independently of the system’s power state or the system’soperating system• Provides text console redirection for system setup, text-based utilities, andoperating system consolesNOTE: To remotely access the BMC through the integrated NIC, you must connectthe network connection to integrated NIC1.For additional information on using BMC, see the documentation for theBMC and systems management applications.Entering the BMC Setup Module1 Turn on or restart your system.2 Press when prompted after POST.If your operating system begins to load before you press ,allow the system to finish booting, and then restart your system and tryagain.
