Dell PowerEdge M820 Owner's Manual
Also see for PowerEdge M820 Systems: ManualCommand reference guideOwner's manualInformation updateRelease notes
                                                                                                                                           | |
Contents
| 
Menu Item DescriptionSystem BIOS Version Displays the BIOS version installed on the system.System Service Tag Displays the system Service Tag.System Manufacturer Displays the name of system manufacturer.System Manufacturer Contact Information Displays the contact information of the system manufacturer.Memory Settings ScreenMenu Item DescriptionSystem Memory Size Displays the amount of memory installed in the system.System Memory Type Displays the type of memory installed in the system.System Memory Speed Displays the system memory speed.System Memory Voltage Displays the system memory voltage.Video Memory Displays the amount of video memory.System Memory Testing Specifies whether system memory tests are run during system boot. Options are Enabledand Disabled. By default, the System Memory Testing option is set to Disabled.Memory Operating Mode Specifies the memory operating mode. The options available depending on the memoryconfiguration of your system are Optimizer Mode, Advanced ECC Mode, Mirror Mode,Spare Mode, and Spare with Advanced ECC Mode. By default, the Memory Operating Modeoption is set to Optimizer Mode.NOTE: The Memory Operating Mode can have different defaults and available optionsbased on the memory configuration.Node Interleaving If this field is Enabled, memory interleaving is supported if a symmetric memoryconfiguration is installed. If Disabled, the system supports Non-Uniform Memoryarchitecture (NUMA) (asymmetric) memory configurations. By default, Node Interleavingoption is set to Disabled.Serial Debug Output By default, it is set to disabled.Processor Settings ScreenMenu Item DescriptionLogical Processor Allows you to enable or disable logical processors and display the number of logicalprocessors. If the Logical Processor option is set to Enabled, the BIOS displays all thelogical processors. If this option is set to Disabled, the BIOS only displays one logicalprocessor per core. By default, the Logical Processor option is set to Enabled.QPI Speed Allows you to set the QuickPath Interconnect data rate settings. By default, the QPI Speedoption is set to Maximum data rate.NOTE: The QPI Speed option is displayed only when both the processors are installed.14 |
Related manuals for Dell PowerEdge M820 Systems
Dell PowerEdge M820 Owner's Manual
Dell PowerEdge M820 Owner's Manual
Dell PowerEdge R820 Owner's Manual
Dell PowerEdge R820 Owner's Manual
Dell PowerEdge M620 Owner's Manual
Dell PowerEdge M420 Owner's Manual
Dell PowerEdge T20 Owner's Manual
Dell PowerEdge M520 Owner's Manual
Dell PowerEdge M420 Owner's Manual
Dell PowerEdge M620 Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine