Dell PowerEdge M820 Owner's Manual
Also see for PowerEdge M820 Systems: ManualCommand reference guideOwner's manualInformation updateRelease notes
                                                                                                                                                           | |
Contents
| 
Troubleshooting An Internal SD CardCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Enter the System Setup and ensure that the Internal SD Card Port is enabled.2. Note the Internal SD Card Redundancy option enabled in the Integrated Devices screen of theSystem Setup (Mirror or Disabled).3. Remove the blade from the enclosure.4. If the Internal SD Card Redundancy option in the Integrated Devices screen of the System Setup isset to Mirror mode and SD card 1 has failed:a. Remove the SD card from SD card slot 1.b. Remove the SD card present in SD card slot 2 and insert it into SD card slot 1.c. Install a new SD card in slot 2.5. If the Internal SD Card Redundancy option in the Integrated Devices screen of the System Setup isset to Mirror mode and SD card 2 has failed, insert the new SD card into SD card slot 2.6. If the Internal SD Card Redundancy option in Integrated Devices screen of the System Setup is setto Disabled, replace the failed SD card with a new SD card.7. Install the blade in the enclosure.8. Enter the System Setup and ensure that the Internal SD Card Port option is enabled and Internal SDCard Redundancy option is set to Mirror mode.9. Check if the SD card is functioning properly.If the problem persists, see Getting Help.Troubleshooting Processors1. Remove the blade from the enclosure.2. Open the blade.3. Ensure that the processor(s) and heat sink(s) are properly installed.4. If your system only has one processor installed, ensure that it is installed in the primary processorsocket (CPU1).5. Close the blade.6. Install the blade in the enclosure.7. Run the appropriate diagnostic test. For more information, see Using System Diagnostics.If the problem persists, see Getting Help.70 |
Related manuals for Dell PowerEdge M820 Systems
Dell PowerEdge M820 Owner's Manual
Dell PowerEdge M820 Owner's Manual
Dell PowerEdge R820 Owner's Manual
Dell PowerEdge R820 Owner's Manual
Dell PowerEdge M620 Owner's Manual
Dell PowerEdge M420 Owner's Manual
Dell PowerEdge T20 Owner's Manual
Dell PowerEdge T20 Owner's Manual
Dell PowerEdge M520 Owner's Manual
Dell PowerEdge M420 Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine