Dell PowerEdge Metered Manual
Also see for PowerEdge R415: ManualPortfolio guideGetting started guideOwner's manualTechnical guide
            | |
Contents
| 
Cable Routing Procedures for Dell™ PowerEdge™ R415 SystemsPage 31.2 Installing the Inner CMA Attachment BracketAs described in theRack Installation Instructions, locate and attach the appropriate inner CMAattachment bracket based on which side you wish to mount the CMA. Use the bracket marked “A” formounting the CMA on the left side, and the bracket marked “B” for mounting on the right side. SeeFigure 2.Figure 2: Attaching the Inner CMA Attachment Bracket1.3 Routing the Power Cables Through the Strain ReliefsAfter you have installed the tray and cables, route the power cables through the strain reliefs locatedon the power supply handles as shown in Figure 3.Figure 3: Routing Power Cables Through the Strain Reliefs1.4 Routing the Cables Through the CMAThe CMA can be installed on either the rear right or rear left side of the rails. Mounting the CMA on theside that is opposite of the power supplies (left-side mount) is recommended; otherwise, the CMAmust be partially disconnected in order to remove the power supplies. Refer to Section 3 for details onpower supply replacement. |
Related manuals for Dell PowerEdge R415
manualsdatabase
Your AI-powered manual search engine