Dell PowerEdge Metered Manual
Also see for PowerEdge R415: ManualPortfolio guideGetting started guideOwner's manualTechnical guide
            | |
Contents
| 
Cable Routing Procedures for Dell™ PowerEdge™ R415 SystemsPage 5Figure 5: Attaching the KVM Dongle to the CMA Basket4. Once you have routed all the cables through the CMA, dress the cable slack between the back ofthe system and the entrance of the CMA using the tie wraps (shown in yellow in all illustrations)provided in the CMA kit.5. Clip off the excess length of material from the tie wraps. Make sure that the heads of the tie wrapsare positioned so as to avoid interference with adjacent systems. Return the CMA to the closed(retracted) position.6. Extend the system out of the rack to verify that there is sufficient slack in the cables on both endsof the CMA.See Figure 6 for an example of a completed left-side mounted CMA installation.Use the hook and loop straps on theCMA basket to secure the KVM dongle.KVM Dongle |
Related manuals for Dell PowerEdge R415
manualsdatabase
Your AI-powered manual search engine