Network Settings screen detailsYou can use the Network Settings screen to modify PXE device settings. The network settings option isavailable only in the UEFI boot mode. BIOS does not control network settings in the BIOS boot mode. ForBIOS boot mode, the option ROM of the network controllers handles the network settings.To view the Network Settings screen, click System Setup Main Menu → System BIOS → NetworkSettings.The Network Settings screen details are explained as follows:Option DescriptionPXE Device n (n =1 to 4)Enables or disables the device. When enabled, a UEFI boot option is created for thedevice.PXE Device nSettings (n = 1 to4)Enables you to control the configuration of the PXE device.UEFI iSCSI Settings screen detailsYou can use the iSCSI Settings screen to modify iSCSI device settings. The iSCSI Settings option isavailable only in the UEFI boot mode. BIOS does not control network settings in the BIOS boot mode. ForBIOS boot mode, the option ROM of the network controller handles the network settings.To view the UEFI ISCSI Settings screen, click System Setup Main Menu → System BIOS → NetworkSettings → UEFI ISCSI Settings.The UEFI ISCSI Settings screen details are explained as follows:Option DescriptionISCSI InitiatorNameSpecifies the name of the iSCSI initiator (iqn format).ISCSI Device n (n =1 to 4)Enables or disables the iSCSI device. When disabled, a UEFI boot option is createdfor the iSCSI device automatically.Integrated Devices screen detailsYou can use the Integrated Devices screen to view and configure the settings of all integrated devicesincluding the video controller, integrated RAID controller, and the USB ports.To view the Integrated Devices screen, click System Setup Main Menu → System BIOS → IntegratedDevices.The Integrated Devices screen details are explained as follows:Option DescriptionUser AccessibleUSB PortsEnables or disables the USB ports. Selecting Only Back Ports On disables the frontUSB ports, selecting All Ports Off disables all USB ports. The USB keyboard andmouse operates during boot process in certain operating systems. After the bootprocess is complete, the USB keyboard and mouse do not work if the ports aredisabled.NOTE: Selecting Only Back Ports On and All Ports Off disables the USBmanagement port and also restricts access to iDRAC features.32