Using Your System Password To Secure Your SystemNOTE: If you have assigned a setup password, the system accepts your setup password as an alternate systempassword.1. Turn on or reboot your system.2. Type your password and press .When Password Status is Locked, type the password and press when prompted at reboot.If an incorrect system password is entered, the system displays a message and prompts you to re-enter your password.You have three attempts to enter the correct password. After the third unsuccessful attempt, the system displays anerror message that the system has halted and must be powered down.Even after you shut down and restart the system, the error message is displayed until the correct password is entered.NOTE: You can use the Password Status option in conjunction with the System Password and Setup Passwordoptions to protect your system from unauthorized changes.Operating With A Setup Password EnabledIf Setup Password is Enabled, enter the correct setup password before modifying most of the System Setup options.If you do not enter the correct password in three attempts, the system displays the messageInvalid Password! Number of unsuccessful password attempts: System Halted!Must power down.Even after you shut down and restart the system, the error message is displayed until the correct password is entered.The following options are exceptions:• If System Password is not Enabled and is not locked through the Password Status option, you can assign asystem password.• You cannot disable or change an existing system password.NOTE: You can use the Password Status option in conjunction with the Setup Password option to protect thesystem password from unauthorized changes.Entering The UEFI Boot ManagerNOTE: Operating systems must be 64-bit UEFI-compatible (for example, Microsoft Windows Server 2008 x64version) to be installed from the UEFI boot mode. DOS and 32-bit operating systems can only be installed from theBIOS boot mode.The Boot Manager enables you to:• Add, delete, and arrange boot options• Access System Setup and BIOS-level boot options without rebootingTo enter the Boot Manager:1. Turn on or restart your system.2. Press after you see the following message: = UEFI Boot Manager30
