Dell PowerEdge R520 Owner's Manual

Also see for PowerEdge R520: Manual Technical guide Portfolio guide Owner's manual Manual

Contents

Dell PowerEdge R520 Owner's Manual Manual pdf 62 page image

Figure 31. Removing and Installing the Expansion-Card Riser 21. expansion-card riser 22. connector3. riser guide pins (2)Installing Expansion-Card RisersCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. If applicable, reinstall the expansion card(s) into the expansion card riser.2. Align the expansion-card riser with the connector and the riser guide pin on the system board.3. Lower the expansion-card riser into place until the expansion-card riser connector is fully seated in the connector.4. Close the system.5. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.6. Install any device drivers required for the card as described in the documentation for the card.iDRAC Ports Card (Optional)The iDRAC Ports card supports:• one 1GbE Ethernet port• SD vFlash card62