Menu Item DescriptionPort E Auto enables BIOS support for the device attached to SATA port E. Off disables BIOS support for thedevice. By default, Port E is set to Auto.Port F Auto enables BIOS support for the device attached to SATA port F. Off disables BIOS support for thedevice. By default, Port F is set to Auto.Boot Settings ScreenMenu Item DescriptionBoot Mode Allows you to set the boot mode of the system.CAUTION: Switching the boot mode may prevent the system from booting if the operatingsystem is not installed in the same boot mode.If the operating system supports UEFI, you can set this option to UEFI. Setting this field to BIOSallows compatibility with non-UEFI operating systems. By default, the Boot Mode option is set toBIOS.NOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting this field to BIOSdisables the UEFI Boot Settings menu.Boot SequenceRetryAllows you to enable or disable the boot sequence retry feature. If this field is enabled and thesystem fails to boot, the system reattempts the boot sequence after 30 seconds. By default, theBoot Sequence Retry option is set to Disabled.BIOS BootSettingsAllows you to enable or disable BIOS Boot options.NOTE: This option is enabled only if the boot mode is BIOS.UEFI BootSettingsAllows you to enable or disable UEFI Boot options.NOTE: This option is enabled only if the boot mode is UEFI.One-Time Boot Allows you to enable or disable a one-time boot from a selected device.Integrated Devices ScreenMenu Item DescriptionIntegrated RAIDControllerAllows you to enable or disable the integrated RAID controller. By default, the Integrated RAIDController option is set to Enabled.User AccessibleUSB PortsAllows you enable or disable the user accessible USB ports. Selecting Only Back Ports Ondisables the front USB ports and selecting All Ports Off disables both front and back USB ports.By default, the User Accessible USB Ports option is set to All Ports On.Internal USB Port Allows you to enable or disable the internal USB port. By default, the Internal USB Port option isset to On.Internal SD CardPortEnables or disables the system’s internal SD card port. By default, Internal SD Card Port optionis set to On.26
