7. riser guide-front (top)Figure 35. Connectors on the Expansion Card Riser 31. chassis intrusion switch2. expansion-card connector (slot 6)3. expansion-card connector (slot 7)4. If applicable, remove or install an expansion card on the riser.5. Replace the expansion-card riser.6. Close the system.7. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.Installing Expansion-Card RisersCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. If applicable, reinstall the expansion card(s) into the expansion card riser.2. Align the expansion-card riser with the connector and the riser guides on the system board.3. Lower the expansion-card riser until the expansion-card riser is firmly seated.4. Close the system.5. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.6. Install any device drivers required for the card as described in the documentation for the card.SD vFlash CardA vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It provides persistenton-demand local storage and a custom deployment environment that allows automation of server configuration, scripts,and imaging. It emulates USB device(s). For more information, see theiDRAC7 User's Guide at dell.com/support/manuals.69