Installing an internal SD cardPrerequisites1. Follow the safety guidelines listed in the Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting andsimple repairs as authorized in your product documentation, or as directed by the online or telephone service and supportteam. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safetyinstructions that are shipped with your product.NOTE: To use an SD card with your system, ensure that the Internal SD Card Port is enabled in System Setup.NOTE: Temporarily label each SD card with its corresponding slot number before removal. Re-install the SD card(s) intothe corresponding slots.Steps1. Locate the SD card connector on the internal dual SD module. Orient the SD card appropriately and insert the contact-pin endof the card into the slot.NOTE: The slot is keyed to ensure correct insertion of the card.2. Press the card into the card slot to lock it into place.Figure 62. Installing an internal SD card1. IDSDM 2. SD card 23. SD card 1 4. SD card slot 15. SD card slot 2Next stepsFollow the procedure listed in the After working inside your system section.120
