Running the System Diagnostics 129Using the Custom Test OptionsWhen you select Custom Test in the Main Menu window, the Customizewindow appears and allows you to select the device(s) to be tested, selectspecific options for testing, and view the test results.Selecting Devices for TestingThe left side of the Customize window lists devices that can be tested.Devices are grouped by device type or by module, depending on the optionyou select. Click the (+) next to a device or module to view its components.Click (+) on any component to view the tests that are available. Clicking adevice, rather than its components, selects all of the components of thedevice for testing.NOTE: After you select all the devices and components that you want to test,highlight All Devices and then click Run Tests.Selecting Diagnostics OptionsUse the Diagnostics Options area to select how you want to test a device. Youcan set the following options:• Non-Interactive Tests Only — When checked, runs only tests that requireno user intervention.• Quick Tests Only — When checked, runs only the quick tests on thedevice. Extended tests will not run when you select this option.• Show Ending Timestamp — When checked, time stamps the test log.Table 5-1. System Diagnostics Testing OptionsTesting Option FunctionExpress Test Performs a quick check of the system. This option runs devicetests that do not require user interaction. Use this option toquickly identify the source of your problem.Extended Test Performs a more thorough check of the system. This test cantake an hour or longer.Custom Test Tests a particular device.Information Displays test results.
