Dell PowerEdge T110 II Technical Manual

Also see for PowerEdge T110 II: Portfolio guide Owner's manual Technical guide Important information Getting started guide

Dell PowerEdge T110 II Technical Manual Manual pdf 35 page image

PowerEdge T110 II Technical Guide 3512 Storage12.1 OverviewThe PowerEdge T110 II supports up to four 3.5” internal hard drives or up to six 2.5” internal harddrives. The following drive configurations are supported: 4 x 3.5” cabled SATA from motherboard SATA connector 4 x 3.5” cabled SAS or SATA with add-on storage controller 6 x 2.5” cabled SAS with add-on storage controller12.2 Hard DrivesTable 9 lists the supported hard drives for the PowerEdge T110 II. For the latest information onsupported hard drives, visit Dell.com.Supported Hard DrivesTable 11.Form Factor Capacity Speed Type3.5” 250GB, 500GB, 1TB, 2TB, 4TB 7.2K SATA3.5” 2TB 5.4 K SATA3.5” 500GB, 1TB, 2TB, 4TB 7.2 K NL SAS3.5” 146GB, 300GB, 450GB, 600GB 15 K SAS2.5” 200GB, 400GB NA SAS SSD2.5” 146GB, 300GB, 600GB, 900GB 10 K SAS12.3 RAID ConfigurationsTable 12 details the factory RAID configurations for the PowerEdge T110 II.Factory RAID ConfigurationsTable 12.Factory ConfigurationNon Mixeddrives, allSATA or allSASConfigurationType Configuration DescriptionMinHDDMaxHDDNo Hard drive 0 NCZCBL No controller/No hard drive 0 0SATA—No RAID 1 MSTCBL On-board SATA Controller 1 4SATA RAID2a MSTR0CBLEmbedded SATA SW RAID—RAID 0 with2 hard drives 2 22b MSTR0CBLEmbedded SATA SW RAID—RAID 0 withabove 2 hard drives 3 43 MSTR1CBL Embedded SATA SW RAID—RAID 1 2 24 MSTR5CBL Embedded SATA SW RAID—RAID 5 3 4