2. USB connectorPCIe Card Holder (Optional)Removing The PCIe Card HolderCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet andperipherals.2. If applicable, rotate the system feet inward and lay the system on its side on a flat, stable surface.NOTE: For systems installed with the wheel assembly, ensure that you lay the system on a sturdy, stablesurface with the wheel assembly extending off the edge of the surface.3. Open the system.4. Press the tabs and pull the PCIe card holder from the chassis.5. Lift the PCIe card holder out of the chassis.6. Close the system.7. If applicable, place the system upright on a flat, stable surface and rotate the system feet outward.8. If applicable, reconnect the system to its electrical outlet and turn the system on, including any attachedperipherals.Figure 44. Removing and Installing the PCIe Card Holder86
