Dell PowerEdge T410 Technical Manual

Also see for PowerEdge T410: Manual Installation Update Technical guide Update

Contents

DellPowerEdge T410 Technical Guide 26Model Speed Power Cache Cores QPI SpeedE5640 2.66GHz 80W 12M 4 5.86GT/sE5630 2.53GHz 80W 12M 4 5.86GT/sE5620 2.40GHz 80W 12M 4 5.86GT/sE5530 2.40GHz 80W 8M 4 5.86GT/sE5607 2.26GHz 80W 8M 4 4.8GT/sE5606 2.13GHz 80W 8M 4 4.8GT/sE5506 2.13GHz 80W 4M 4 4.8GT/sE5603 1.6GHz 80W 4M 4 4.8GT/sE5503 2.00GHz 80W 4M 2 4.8GT/s6.4 Processor ConfigurationsThe PowerEdge T410 will operate with either a single processor or dual processors. However, sincethe memory controller is embedded in the processor, when only one processor is installed in thesystem, it supports 4 DIMMs, minimum 1GB and maximum 64GB. When two processors are installed inthe system, it supports 8 DIMMs, minimum 2GB and maximum 128GB.6.5 Processor InstallationRefer to the Processors section in the Installing System Components chapter of the Dell PowerEdgeT410 Systems Hardware Owner’s Manual on Support.Dell.com for processor installation and removalinstructions.