Dell PowerEdge T410 Technical Manual

Also see for PowerEdge T410: Manual Installation Update Technical guide Update

Contents

DellPowerEdge T410 Technical Guide 38Factory ConfigurationNon-Mixed drivesall SATA, all SAS, orall SSD; all 2.5” or all3.5”Cabled/Hot-plug Config Type Cabled/ Hot-plug Config Type Cabled/Hot-plugConfigTypeCabledSW RAID (ICH)C18A MSTR0CBL RAID 0 for 2 drives (PERC S100) 2 2C18B MSTR0CBL RAID 0 for 3 and above HDDs(PERC S100)3 4C19 MSTR1CBL RAID 1 (PERC S100) 2 2C20 MSTR10CBL RAID 10 (PERC S100) 4 4C21 MSTR5CBL RAID 5 (PERC S100) 3 4SW RAID(Add-in Card)C22A ASSR0CBL RAID 0 for 2 drives (PERC S300) 2 2C22B ASSR0CBL RAID 0 for 3 and above drives(PERC S300)3 6Mixed Hard Drive (SAS + SATA) Factory ConfigurationMixed SAS + SATAMin: 2xSAS+1xSATAMax: 2xSAS+4xSATA;all 2.5” or 3.5”Cabled/Hot-plug Config Type Configs Description Min HDD Max HDDHot-plugMix SAS andSATA—NoRAIDC15 ASS-X Add-in SAS/SATA RAID card, No RAID(SAS 6/iR, PERC H200)2xSAS +1xSATA2xSAS +4xSATAMix SAS andSATA—RAID 1+ RAID 1C16 ASSR1R1-X Add-in SAS/SATA RAID card, RAID 1 +RAID 1 (SAS 6/iR, PERC 6/i, PERCH700, PERC H200)2xSAS +2xSATA2xSAS +2xSATAMix SAS andSATA—RAID 1+ RAID 5C17 ASSR1R5-X Add-in SAS/SATA RAID card, RAID 1 +RAID 5 (PERC 6/i, PERC H700) 2xSAS +3xSATA2xSAS +4xSATA12.4 Storage ControllersThe PowerEdge T410 supports the storage controllers listed below. For information on cardquantities and priorities, see the Expansion Cards section in the Installing System Componentschapter of the Dell PowerEdge T410 Systems Hardware Owner’s Manual on Support.dell.com.12.4.1 SAS 6/iRThe T410 internal SAS 6/iR HBA is an expansion card that plugs into one of the PCI Express x8 slots(four lanes wired). It incorporates two four-channel SAS IOCs for connection to SAS or SATA hard diskdrives.12.4.2 PERC 6/iIf you want an internal RAID solution, select the PERC 6/i or PERC H700. The PERC 6/i uses the LSI1078 ROC (RAID on Chip) processor with a PCI Express host interface and DDR2 memory. A battery isalso available for backup.