Menu Item DescriptionSystem BIOS Version Displays the BIOS version installed on the system.System Service Tag Displays the system Service Tag.System Manufacturer Displays the name of system manufacturer.System ManufacturerContact InformationDisplays the contact information of the system manufacturer.Memory Settings ScreenMenu Item DescriptionSystem Memory Size Displays the amount of memory installed in the system.System Memory Type Displays the type of memory installed in the system.System MemorySpeedDisplays the system memory speed.System MemoryVoltageDisplays the system memory voltage.Video Memory Displays the amount of video memory.System MemoryTestingSpecifies whether system memory tests are run during system boot. Options are Enabled andDisabled. By default, the System Memory Testing option is set to Disabled.Memory OperatingModeSpecifies the memory operating mode. The options available depending on the memoryconfiguration of your system are Optimizer Mode, Advanced ECC Mode, Mirror Mode, SpareMode, Spare with Advanced ECC Mode, Dell Fault Resilient Mode. By default, the MemoryOperating Mode option is set to Optimizer Mode.NOTE: The Memory Operating Mode can have different defaults and available optionsbased on the memory configuration.NOTE: The Dell Fault Resilient Mode establishes an area of memory that is fault resilient.This mode can be used by an operating system that supports the feature to load criticalapplications or enables the operating system kernel to maximize system availability.Node Interleaving If this field is Enabled, memory interleaving is supported if a symmetric memory configuration isinstalled. If Disabled, the system supports Non-Uniform Memory architecture (NUMA)(asymmetric) memory configurations. By default, Node Interleaving option is set to Disabled.Processor Settings ScreenMenu Item DescriptionLogical Processor Allows you to enable or disable logical processors and display the number of logicalprocessors. If the Logical Processor option is set to Enabled, the BIOS displays all the logicalprocessors. If this option is set to Disabled, the BIOS only displays one logical processor percore. By default, the Logical Processor option is set to Enabled.QPI Speed Allows you to set the QuickPath Interconnect data rate settings. By default, the QPI Speedoption is set to Maximum data rate.28
