Figure 63. Removing and installing the information tag1. information tag 2. tab3. slotInstalling the control panel assemblyPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Keep the #2 Phillips screwdriver ready.Steps1. Replace the blank information tag in the new control panel with the information tag retained fromthe old control panel.NOTE: Information tag lists system information such as Service Tag, NIC, MAC address, and soon.2. To install the information tag, push the information tag into the control-panel slot.3. Connect the control panel cable and the control panel USB cable to the control panel module.4. Align and insert the control panel into the control panel slot in the chassis.5. Secure the control panel to the chassis using the screw.6. Connect the control panel cable and the control panel USB cable to the system board.Next steps1. If applicable, install the cooling fan assembly.2. Follow the procedure listed in After working inside your system.132