Menu Item DescriptionNOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting thisfield to BIOS disables the UEFI Boot Settings menu.If the operating system supports UEFI, you can set this option to UEFI. Setting thisfield to BIOS allows compatibility with non-UEFI operating systems. By default, theBoot Mode option is set to BIOS.Boot SequenceRetryEnables or disables the boot sequence retry feature. If this field is enabled and thesystem fails to boot, the system reattempts the boot sequence after 30 seconds. Bydefault, the Boot Sequence Retry option is set to Enabled.Hard Disk Failover Specifies which devices in the Hard-Disk Drive Sequence are attempted in theboot sequence. When the option is Disabled, only the first hard disk device in thelist is attempted to boot. When set to Enabled, all hard disk devices are attemptedin order, as listed in the Hard-Disk Drive Sequence. This option is not enabled forUEFI Boot Mode.Boot OptionsSettingsConfigures the boot sequence and the boot devices.Network Settings screen detailsYou can use the Network Settings screen to modify PXE device settings. Network Settings are onlyavailable in UEFI boot mode. BIOS does not control network settings in the BIOS boot mode. For BIOSboot mode, the network settings are handled by the network controllers option ROM.You can view the Network Settings screen by clicking System Setup Main Menu → System BIOS →Network Settings.The Network Settings screen details are explained as follows:ExampleMenu Item DescriptionPXE Device n (n =1 to 4)Enables or disables the device. When enabled, a UEFI boot option is created for thedevice.PXE Device nSettings (n = 1 to4)Allows you to control the configuration of the PXE device.Integrated Devices screen detailsIntegrated Devices screen allows you to view and configure the settings of all integrated devicesincluding the video controller, integrated RAID controller, and the USB ports.In the System Setup Main Menu, click System BIOS → Integrated Devices.The Integrated Devices screen details are explained below.36
