182 Running the System DiagnosticsEmbedded System Diagnostics FeaturesThe embedded system diagnostics provides a series of menus and options forparticular device groups or devices. The system diagnostics menus andoptions allow you to:• Run tests individually or collectively• Control the sequence of tests• Repeat tests• Display, print, or save test results• Temporarily suspend testing if an error is detected or terminate testingwhen a user-defined error limit is reached• View help messages that briefly describe each test and its parameters• View status messages that inform you if tests are completed successfully• View error messages that inform you of problems encountered duringtestingWhen to Use the Embedded System DiagnosticsIf a major component or device in the system does not operate properly,component failure may be indicated. As long as the microprocessor and thesystem's input/output devices are functioning, you can use the systemdiagnostics to help identify the problem.Running the Embedded System DiagnosticsThe system diagnostics program is run from the Unified Server Configurator(USC) screen.CAUTION: Use the system diagnostics to test only your system. Using thisprogram with other systems may cause invalid results or error messages.1 As the system boots, press .2 Click Diagnostics in the left pane and click Launch Diagnostics in theright pane.The Diagnostics menu allows you to run all or specific diagnostics tests or toexit.
