Using the System Setup Program and UEFI Boot Manager 77iDRAC Configuration UtilityThe iDRAC Configuration Utility is a pre-boot configuration environmentthat allows you to view and set parameters for the iDRAC6 and for themanaged server.The iDRAC Configuration Utility provides the following features:• Enables fault logging and SNMP alerting• Provides access to system event log and sensor status• Allows control of system functions including power on and off• Functions independently of the system’s power state or the system’soperating system• Provides text console redirection for system setup, text-based utilities, andoperating system consolesIn addition the iDRAC Configuration Utility enables you to:• Configure, enable, or disable the iDRAC6 local area network through thededicated iDRAC6 Enterprise card port or the embedded NIC1.• Enable or disable IPMI over LAN• Enable a LAN Platform Event Trap (PET) destination• Attach or detach the Virtual Media devices• Change the administrative user name and password and manage userprivileges• View System Event Log (SEL) messages or clear messages from the logFor additional information on using iDRAC6, see the documentation foriDRAC6 and systems management applications.Entering the iDRAC Configuration Utility1 Turn on or restart your system.2 Press when prompted during POST.If your operating system begins to load before you press ,allow the system to finish booting, and then restart your system and tryagain.
