Dell PowerEdge UPS 500T User Manual

Also see for PowerEdge UPS 500T: Installation and configuration User guide Installation notes Notice User guide

Dell PowerEdge UPS 500T User Manual Manual pdf 39 page image

Dell UPS Local Node ManagerUSER GUIDEDell.comDELL ULNM – User GuideP‐164000120 Rev 0.04CONFIGURATION36Select one of the items, and then click on the corresponding button on the right: Edit system information: to enter contact and location information for DELL ULNM software. Edit language allows the user to change the user language.(Czech, English, French, German, Japanese, Korean, Polish, Portuguese, Russian, SimplifiedChinese, Spanish are currently supported) Edit scan settings changes the default SNMP community name for discovery andenables/disables periodic scan of new nodes. Module Settings enables optional modules (e.g. Shutdown Controller)3.1.8. SHUTDOWN CONTROLLER3.1.8.1. INTRODUCTIONDell UPS Local Node Manager can acquire UPS alarms from a UPS (through USB or RS232) andforward the shutdown alarms to the other Dell UPS Local Node Managers. This specific Dell UPSLocal Node Manager is called the “Shutdown Controller”.Note: The Shutdown Controller can’t acquire information through a SNMP/Web Card.3.1.8.2. ACTIVATING SHUTDOWN CONTROLLER FEATUREYou have to activate the Shutdown Controller feature on the Dell ULNM 1 that relays the alarms(connected to the UPS through USB or RS232).This option can be activated from Settings System Module SettingDouble click on Module settings section, then check the checkbox.Other Dell UPS Local Node Managers will discover this Dell UPS Local Node Manager through anetwork scan.