8. Close the PCIe cage door.9. Close the system.10. Turn on the server module using the operating system commands or the CMC.Figure 62. Removing and Installing a Full-Height Expansion Card1. tabs on expansion-card divider (2) 2. PCIe cage3. expansion card connectors on the riser (3) 4. expansion-card support bracket5. expansion cardInstalling A Full Height Expansion CardCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Unpack the expansion card and prepare it for installation.For instructions, see the documentation accompanying the card.2. Turn off the server module to which the expansion card is assigned, using the operating system commands or theCMC.3. Open the system.4. Open the PCIe cage door.5. Remove the filler bracket.6. Holding the card by its edges, position the card so that the card aligns with the support bracket on the PCIe cage,and the card-edge connector aligns with the expansion-card connector on the expansion-card riser.7. Slide the expansion card into the PCIe cage and insert the card-edge connector firmly into the expansion-cardconnector on the riser, until the card is fully seated.93
