Dell PowerEdge XR7620 Installation And Service Manual

Table 1. Features available on the front view of Front Accessed E3.S configurationItem Ports, panels, or slots Icon Description1 Status LED control panel N/A Contains the system health,system ID, status LED.● Status LED: Enables youto identify any failedhardware components.There are five status LEDsand an overall systemhealth LED (Chassis healthand system ID) bar. Formore information, seethe Status LED indicatorssection.2 PCIe expansion card riser 1(slot 1)N/A Enables you to connect PCIExpress expansion cards.3 PCIe expansion card riser 1(slot 2)N/A Enables you to connect PCIExpress expansion cards.4 PCIe expansion card riser 2(slot 3)N/A Enables you to connect PCIExpress expansion cards.5 PCIe expansion card riser 2(slot 4)N/A Enables you to connect PCIExpress expansion cards.6 Drive N/A Enables you to install up to 4x 2.5-inch, or 8 x E3.S Solid-State Drives (SSDs)7 Power button control panel N/A Contains the power button,USB port, iDRAC Direct microUSB port, and the iDRACDirect status LED.8 Power supply unit (PSU 2)and (PSU 1)Indicates the PSU2(redundant PSU) and PSU1(primary PSU)9 System identification button Press the system ID button:● To locate a particularsystem within a rack.● To turn the system ID onor off.To reset iDRAC, press andhold the button for 16seconds.NOTE:● To reset iDRAC usingsystem ID, ensure thatthe system ID button isenabled in the iDRACsetup.● If the system stopsresponding duringPOST, press and holdthe system ID button(for more than fiveseconds) to enter theBIOS progress mode.10 VGA port Enables you to connect adisplay device to the system.System overview 11