Dell PowerEdge XR7620 Installation And Service Manual

Table 63. TLS Authentication Configuration screen detailsOption DescriptionTLS Authentication Mode View or modify the device's boot TLS Authentication Mode. This option is set to OneWay by default. None means the HTTP server and the client will not authenticate eachother for this boot.Root Certificate Configuration Import, delete, or export the root certificate.Table 64. NVMe-oF SubSystem Settings screen detailsOption DescriptionNVMe-oF SubSystemn (n = 1 to 4) Enables or disables NVMe-oF SubSystem. This option is set to Disabled bydefault.NVMe-oF SubSystemn Settings (n = 1to 4)Enables you to control the configuration of the NVMe-oF SubSystem, if Enabled.Table 65. NVMe-oF SubSystem n SettingsOption DescriptionInterface NIC interface used for NVMe-oF connections. This option is set to EmbeddedNIC 1 Port 1 Partition 1 by default.Transport Type This field sets the value of transport type for NVMe-oF connection. This option isset to TCP by default.Protocol This field sets the value of protocol type for NVMe-oF connection. This option isset to IPv4 by default.VLAN Enables or disables VLAN for this NVMe-oF connections. This option is set toDisabled by default.VLAN ID Specifies the VLAN ID for this NVMe-oF connection. This option is set to 1 bydefault.VLAN Priority Specifies the VLAN priority for this NVMe-oF connection. This option is set to 0 bydefault.Retry Count Specifies the retry count for this NVMe-oF connection. This option is set to 3 bydefault.Timeout Specifies the time out for this NVMe-oF connection. This option is set to 10000 bydefault.DHCP Enables and disables the DHCP for this NVMe-oF connection. This option is set toDisabled by default.Host IP Address Specifies the Host IP Address for this NVMe-oF connection.Host Subnet Mask Specifies the Host Subnet Mask for this NVMe-oF connection.Host Gateway Specifies the Host Gateway for this NVMe-oF connection.NVMe-oF Subsystem info via DHCP Enables and disables the NVMe-oF subsystem's DHCP for this connection. Thisoption is set to Disabled by default.NVMe-oF Subsystem NQN Specifies the NVMe-oF subsystem's NQN for this connection.NVMe-oF Subsystem Address Specifies the NVMe-oF subsystem's IP address for this connection.NVMe-oF Subsystem Port Specifies the NVMe-oF subsystem's port for this connection. This option is set to4420 by default.NVMe-oF Subsystem NID Specifies the NamespaceID (NID) for this NVMe-oF connection.NVMe-oF Subsystem Controller ID Specifies the NVMe-oF subsystem's Controller ID for this connection. This optionis set to 0 by default.Pre-operating system management applications 59