Dell PowerVault 110T SDLT320 User Manual

Also see for PowerVault 110T SDLT320: User guide

Contents

Dell PowerVault 110T SDLT320 User Manual Manual pdf 24 page image

Table 4. ESD Failure Level LimitsAcoustic Noise EmissionsTable 5 provides the tape drive's acoustic noise emission levels, both as noise power and sound pressure.Table 5. Acoustic Noise Emissions, NominalBack to Contents Page* The tape drive shall maintain normal operation both in Read/Write and in Standby conditions. No errors attributable to the test shall be encountered.‡ Conducted: The transient voltage is the actual peak voltage above the normal AC voltage from the power source. The maximum energy in a single pulse from the transientgenerator must be limited to 2.5 W.Failure Type Equipment Specifications CommentsHard Office 1 to 12 kV No operator intervention (soft recoverable allowed)Hardware Office Up to 15 kV No component damage; operator intervention allowed (soft/hard errors allowed)Acoustics - Preliminary declared values per ISO 9296 and ISO 7779/EN27779Mode Noise Power Emission Level (LNPEc) Internal Version External VersionIdle Not applicable 5.4 BelStreaming 5.9 Bel 5.9 BelMode Sound Pressure Level (LPAc) Internal Version External VersionIdle Not applicable 42 dBStreaming 47 dB 53 dB