3-10 Dell PowerVaullt 120T DDS4 Autoloader User's Guide2. To load the magazine, insert it into the slot in the front of the autoloader in thedirection of the large arrow. Apply steady pressure until the mechanism takes themagazine and pulls it into the autoloader.Figure 3-14. Inserting the magazine3. The autoloader runs a rotation check automatically to check the following;• cartridges are set in the magazine• cartridges inserted in the correct directionIt takes about 90 seconds to complete this rotation check. After completing this check,the cartridge number icon "1"~"8" on the LCD should stop blinking and stay on. The LCDwill indicate "Ready".4. The cartridges can be selected by the following 2 methods.By Front Panel OperationYou can select the cartridges loaded into the magazine as necessary by using theSelect button/the Enter button on the front panel.When you press the Select button, the LCD displays the number of the selectedcartridge. (The number changes sequentially each time you press the Select button.)When the Enter button is pressed for confirmation, the cartridge whose number isdisplayed is loaded.By Host OperationData cartridges can also be selected as necessary by using the MOVE MEDIUMcommand on your host computer.Exchanging the CartridgesBy Front Panel OperationYou can select data cartridges loaded into the magazine as necessary by using theSelect button/the Enter button on the front panel.When you press the Select button, the LCD displays the number of the selectedcartridge. (The number changes sequentially each time you press the Select button.)When the Enter button is pressed for confirmation, the data cartridge currently loaded inthe DDS drive is unloaded and the cartridge whose number is displayed is loaded.By Host Operation