Dell PowerVault 122T DLT VS80 User Manual

Also see for PowerVault 110T DLT VS80: User guide Quick start guide Compatibility Matrix Manual

Dell PowerVault 122T DLT VS80 User Manual Manual pdf 25 page image

Front Panel ControlsBack Panel OverviewChoosing a LocationChoose a location that meets the following criteria (see "Technical Specifications"):1 Power Switch2 Media Door3 Front Panel LEDs4 Front Panel LCD Screen5 Control Keys1 68-pin SCSI Connectors2 Fan Vent3 Power Connector4 Bar Code Reader (optional)NOTE: The arrows indicate the screws on the back of the unit that need to be removed if you want to remove the cover. Three additionalscrews on each side of the unit must also be removed in order to lift the top cover.StandaloneRequirementsSelect a location that is flat, sturdy, level, and close to a host server. Do not place the autoloader on the floor or other carpetedsurfaces.NOTICE: Do not place the autoloader on its side or upside down or stack items that weigh more than 15 KG (33 lb)on top of the autoloader.Rack Requirements Standard 19-inch rack with 2U of clearance.Room Temperature 10–35ºC (50–95ºF)Power Source AC power voltage: 100–127 VAC; 200–240 VACLine frequency: 50–60 HzNOTE: Locate the AC outlet near the autoloader. The AC power cord is the product's main AC disconnect device andmust be easily accessible at all times.Weight 10 kg (22 lb)Air Quality Minimize sources of particulate contamination. Avoid areas near frequently used doors and walkways, stacks of supplies thatcollect dust, printers, and smoke-filled rooms.NOTICE: Excessive dust and debris can damage tapes and tape drives.Humidity 20–80% RHClearance Back: Minimum of 15.4 cm (6 in)Front: Minimum of 30.8 cm (12 in)Sides: Minimum of 5.08 cm (2 in)