Dell PowerVault 200S Replacement Instructions Manual

Also see for PowerVault 200S: Rack Installation Guide Manual Update Configuration Installation

Contents

Dell PowerVault 200S Replacement Instructions Manual Manual pdf 4 page image

4 Dell PowerVault 2xxS Storage Systems SCSI Backplane Board Replacement InstructionsSlowly pull the carrier toward you until it slides free of the drive bay.Figure 3. Drive Carrier LockFigure 4. Drive Carrier HandleRemove the Power SuppliesNOTICE: In a nonredundant system, note the location of the powersupply and the power-supply blank as you remove them from thepower-supply bays. During the installation procedure (found later inthis document), you must return the power supply and the power-supply blank to the same power-supply bays from which they wereremoved.NOTE: A redundant storage system has two power supplies. A nonredundantstorage system has one power supply and one power-supply blank. Because apower supply and a power-supply blank are removed in the same manner, bothcomponents are referred to as a power supply in this procedure.To remove the power supplies from the storage system, perform the followingsteps: