Dell PowerVault 200S Replacement Instructions Manual

Also see for PowerVault 200S: Rack Installation Guide Manual Update Configuration Installation

Contents

Dell PowerVault 200S Replacement Instructions Manual Manual pdf 7 page image

Dell PowerVault 2xxS Storage Systems SCSI Backplane Board Replacement Instructions 71. Using a Phillips-head screwdriver, loosen the captive screw at the top ofthe enclosure services module.2. Grasp the handle on the enclosure services module and pull it from themodule bay (see Figure 7).Figure 7. Enclosure Services Module Removal3. Repeat steps 1 and 2 to remove the remaining enclosure services module.Remove the Component Mounting BracketTo remove the component mounting bracket, perform the following steps:1. Using a Phillips-head screwdriver, remove the two screws that secure thecomponent mounting bracket to the chassis (see Figure 8).2. Lift the component mounting bracket slightly and slide it out of the chassis.captive screw