Index 3error messages when haltingCPU fan has failed, 3-21Disk hung during swap!, 3-21Error dumping core, 3-21Halted, 3-21ISA IOCHK, 3-21Panicking, 3-21error or informational messagesCIFS service disabled!, 3-16Data disk n x% rebuilt, 3-17disk n is broken, 3-17Fans stopped; replace them!, 3-18Fault on shelf n, 3-18maintenance mode, 3-18NFS service not enabled, 3-18Non Maskable interrupt, 3-18Parity disk is broken, 3-18Parity disk x% rebuilt, 3-19Power supply degraded, 3-19Replace NVRAM batteries!, 3-19Reporting SNMP traps, 3-20Setting time from remote host, 3-20Setting up SNMP trap host, 3-20x default route, 3-20x route to y, 3-20ESD, xiESD wrist strapsee electrostatic discharge wrist strapEthernetavailable network connectivity, 1-4,2-15built-in 10/100Base-T Ethernetinterface, 1-4cabling requirements, 2-16card LEDs, 3-5connecting the filer, 2-16types of cards, 2-16+fans*CPU fan stopped message, 3-11*Fans stopped message, 3-11Fans stopped; replace them!message, 3-18Fault on shelf n message, 3-18FC-ALsee Fibre Channel Arbitrated Loopfeaturesback panel, 1-4behind front panel, 1-3front panel, 1-2fiber cable, GB Ethernet, 2-16Fibre Channel Arbitrated Loop (FC-AL)adapter, 1-6, 2-13adapter slot assignments, 1-8disk array enclosure (DAE), 1-6filer-to-disk storage cable, 2-12, 2-13filer-to-shelf cable, 2-11interface, 1-5, 2-16interface with PowerVault F700N DAEwith 18-GB FC-AL disk drives, 1-5File system may be scrambled message,3-14fixing problems, 4-1FLPY messages*FLPY format err message, 3-11*FLPY head err message, 3-11*FLPY init fail message, 3-12*FLPY reg error message, 3-12*FLPY seek err message, 3-11*FLPY setup err message, 3-11*FLPY track err message, 3-11FP button stuck message, 3-12frequency, electrical requirements, 2-2front panel, 1-2!GB Ethernet card, 1-5cabling requirements, 2-16LEDs, 3-8slot assignments, 1-8getting help, 4-1grounding, 2-2using wrist strap and grounding leash,2-3