60 Using the System Setup Program and UEFI Boot ManagerProcessor Settings ScreenSATA Settings ScreenOption Description64-bit Specifies if the processor(s) support 64-bit extensions.Core Speed Displays the processor clock speed.Bus Speed Displays the processor bus speed.Logical Processor(Enabled default)On processors that support SimultaneousMulti-Threading (SMT) technology, each processor coresupports up to two logical processors. If this field is set toEnabled, the BIOS reports both logical processors. If setto Disabled, only one logical processor is monitored bythe BIOS.Virtualization Technology(Disabled default)Enabled permits virtualization software to use thevirtualization technology incorporated in the processor.NOTE: Disable this feature if your system will not berunning virtualization software.Execute Disable(Enabled default)Enables or disables Execute Disable Memory ProtectionTechnology.Number of Cores perProcessor(All default)If set to All, the maximum number of cores in eachprocessor is enabled.Turbo Mode If Turbo Boost Technology is supported by theprocessor(s), enables or disables Turbo Mode.C States(Enabled default)When set to Enabled, the processor(s) can operate in allavailable power states.Processor X ID Displays the family, model, Level 2 cache size, Level 3cache size, and number of cores of each processor.Option DescriptionEmbedded SATA(ATA Mode default)ATA Mode enables the integrated SATA controller. Offdisables the controller.Port A(Auto default)Auto enables BIOS support for the device attached toSATA port A. Off disables BIOS support for the device.
